Low capital is worth conductive thin coating material to face the floor. Rectification or time limit for temporary or non-professional self-coating, epoxy floor in particular, has done a form of ground for anti-static construction, and can facilitate the use of epoxy-type anti-static thin silicone coating.
The material does not require conductive carbon black in coating and layout of copper mesh, just roll 1 or 2 can achieve a permanent anti-static effect, the overall good results and does not contain conductive additives, will not produce static electricity damage and failure phenomena, as long as note after all the economy to facilitate the maintenance of anti-static coating method.
Construction scale thin coating processes are: coating, cloth copper wire, conductive carbon black in coating, top coating of thin conductive coating 2. Conducting self-leveling construction methods are: coating, coating and mortar in the same general epoxy floor construction; cloth copper wire, as required by 2 * 2m or 4 * 4m wiring; conductive carbon black in coating, conductive top coat.
Detail what materials to use mainly depends on the construction side of the conductive powder selected no fiber-type surface probe, the average degree of good conductivity, conductive fiber type on color and thickness of more compliance requirements, and general self-leveling leveling and the construction there is no difference between using of requirements.
Some products actually leveling a large area better, especially once put into use and general self-leveling the same, like the surface of fiber probe tip is in the process of using and not significantly, better gloss and wear resistance shortcoming is that most of the time in poor model for the surface effect has been eliminated Party.
Therefore, for certain requirements, or thickness greater than 1mm light colored conductive self leveling top coat, then use conductive fiber material; in the construction are required resistance of conductive carbon black layer the smaller the better, is conducive to the conductive top coating durability ; conductive epoxy coating material and the general has more or less different, as complete and self-leveling epoxy coating conductivity, is the use of conductive additives species, the static loss is very great, for maximum of 3 months or to maintain are invalid.
Conductive carbon black in some of the material does not need painted and decorated copper mesh, just roll several times to achieve a permanent anti-static effect.
