Paint color is a floating floor separations often a phenomenon occurs, in addition to construction factors, accounted for a large paint the relationship between quality, especially on gray, blue and other composite color. Spend very little time to test in advance what position to do so with bottom paint on the construction of a solid, paint quality problems must be promptly replaced. The tightly closed in a sheet, the transfer of about 100 grams of good paint, brushing the first half of the area, such as 5-8 minutes (this time the general epoxy floor interface standard time, if more than this for too long, Construction will occur curing interface, not a material problem) and then brush the other half, where the interface with brush or knife Tuyun: first paint color difference will be a little bit is normal, if a good paint for 10 minutes or so will not see to color, some users will paint several drops of paint inspection, if this were not so color quality is very reliable evidence. But the paint off mark, there is serious then the color change too rapidly, the initial color and color completely different curing coatings have surfaced in the dark or light the apparent leveling poor vision caused by color separation is one of the reasons
