The FINA Bureau met in Rome (ITA) and approved the final list of FINA Commissions and Committees for the period 2009-2013. For each of the technical committees of the five FINA aquatic disciplines, the number of members was increased from 12 to 15. This new composition is aimed at supporting the development of FINA sports in the five continents and is due to the improvement of the number of affiliated FINA National Federations worldwide, which is actually of 201.
These new technical committees will meet before the end of the year to establish their four- year plan of activities, to be presented at the next FINA Bureau meeting on January 15-16, 2010 in Bangkok (THA).
Moreover, the Bureau reconfirmed its position in relation with the requirements for swimwear approval, reinforcing the decision of the Congress on July 24, 2009. These rules include the following conditions for swimwear approval:
Surface covered: Men swimsuit shall not extend above the navel nor below the knee and for women shall not cover the neck or extend past the shoulders nor shall extend below the knee.
Type of material: The material used for swimsuits can be only "Textile Fabric(s)" defined for the purpose of these rules as material consisting of, natural and/or synthetic, individual and non consolidated yarns used to constitute a fabric by weaving, knitting, and/or braiding.
Surface treatment of the textile fabric: Any material added on to the surface of the textile fabric (e.g. coating, printing, impregnation) shall not close the original open mesh structure of the base textile fabric. The treated material shall further comply with all requirements in particular in regard to thickness, permeability and flexibility. This part of the rule does not apply to logos and labels. This applies to both the manufacturing level and the actual use of the swimsuit.
Flexibility: the material shall be flexible and soft-folding.
Regular flat material: The material shall be regular and flat. The material shall not form outstanding shapes or structures, such as scales.
Outside application: No outside application shall be added on the material.
Variety of materials: Different materials may be used in one swimsuit provided they are textile fabrics as defined above and they comply with all other criteria including notably thickness and permeability (measures to apply to total layers). Combination of materials shall further not create outstanding shape(s) or structure(s). Layered materials must be completely attached/bound/stuck together except where required to protect sensitive parts ("privacy layers").
Thickness: The material used shall have a maximum thickness of 0.8mm. It is clarified that this maximum thickness does not apply to seams as far as they are functional and their thickness and width result from their natural function.
Buoyancy: The swimsuit shall not have a buoyancy effect above 0.5 Newton measured after application of vacuum.
These new technical committees will meet before the end of the year to establish their four- year plan of activities, to be presented at the next FINA Bureau meeting on January 15-16, 2010 in Bangkok (THA).
Moreover, the Bureau reconfirmed its position in relation with the requirements for swimwear approval, reinforcing the decision of the Congress on July 24, 2009. These rules include the following conditions for swimwear approval:
Surface covered: Men swimsuit shall not extend above the navel nor below the knee and for women shall not cover the neck or extend past the shoulders nor shall extend below the knee.
Type of material: The material used for swimsuits can be only "Textile Fabric(s)" defined for the purpose of these rules as material consisting of, natural and/or synthetic, individual and non consolidated yarns used to constitute a fabric by weaving, knitting, and/or braiding.
Surface treatment of the textile fabric: Any material added on to the surface of the textile fabric (e.g. coating, printing, impregnation) shall not close the original open mesh structure of the base textile fabric. The treated material shall further comply with all requirements in particular in regard to thickness, permeability and flexibility. This part of the rule does not apply to logos and labels. This applies to both the manufacturing level and the actual use of the swimsuit.
Flexibility: the material shall be flexible and soft-folding.
Regular flat material: The material shall be regular and flat. The material shall not form outstanding shapes or structures, such as scales.
Outside application: No outside application shall be added on the material.
Variety of materials: Different materials may be used in one swimsuit provided they are textile fabrics as defined above and they comply with all other criteria including notably thickness and permeability (measures to apply to total layers). Combination of materials shall further not create outstanding shape(s) or structure(s). Layered materials must be completely attached/bound/stuck together except where required to protect sensitive parts ("privacy layers").
Thickness: The material used shall have a maximum thickness of 0.8mm. It is clarified that this maximum thickness does not apply to seams as far as they are functional and their thickness and width result from their natural function.
Buoyancy: The swimsuit shall not have a buoyancy effect above 0.5 Newton measured after application of vacuum.
