About 7062 results for reserve requirement ratio
-
ARJM12A1-811-BA-CW2 Multi-port Rj45 1x2 Ethernet Connector Dual Port 5G BASE - T
Aug,29,2023
-
ARJM12A1-811-BA-CW2 Multi-port Rj45 1x2 Ethernet Connector Dual Port 5G BASE - T ♦ Designed for network interface card application. ♦ Designed to meet IEEE802.3u requirement. ♦ Available in all turn ratios used by LAN ICmanufactures. ♦ Primary center taps available for additional EMIreduction. ♦ Simplest magnetic ...
|
|
-
Envelop Dual Axis Worm Gear Slew Drive With 12vdc Electrical Motor , Long Life
Sep,14,2023
-
IP66 Envelop Dual Axis Worm Drive With 12vdc Electrical Motor For Tower Concentrated Solar Power Description What is Tower CSP The Heliostat concentrated solar power station, as one of the mainstream CSP technology routes, tower CSP has received much attention in recent years. Compared with the mature trough technology...
|
|
-
SDE3 Dual Axis Slew Drive With High Torque 12v Dc Motor For Solar Tracking System
Sep,14,2023
-
SDE3 Dual Axis Slew Drive With High Torque 12v Dc Motor For Solar Tracking System Description Slewing drive is a perfect motion control product for the application which requires rotational torque strength. The slew drive can apply for solar tracking system including single and dual axis solar tracking system, it is ...
|
|
-
5000kg Gearless Small Machine Room Elevator Lift With Standard Design
Sep,7,2023
-
Gearless small machine room passenger elevator price with standard design 5000kg Gearless Small Machine Room Elevator Lift With Standard Design Features Gearless, optimized cutting angle; 4: 1 rope winding ratio; Innovative wire rope winding method; The auxiliary beam rests on the mainframe load beam. Advantages Energy ...
|
|
-
Granule And Powder Bone Glue / Jelly Glue
Sep,9,2023
-
Granule And Powder Bone Glue / Jelly Glue Instructions When using bone glue, soak bone glue with the same volume or a little more water( had better use hot water) for 10 hours or so, make the glue soft, then heat to 75℃ or so, make it into glue solution can be used, The ratio of glue to water should be determined ...
|
|
-
High Manganese Steel Hammer Mill Machine
Sep,8,2023
-
High efficiency Hammer Crusher Mill This machine is suitable for crushing medium-hardness materials such as limestone, slag, coke, coal and so on in cement, chemical, electric power, metallurgy and other industrial departments. It has the advantages of simple structure, large crushing ratio and high production ...
|
|
-
Stone Powder Making Mining Crusher Machine
Sep,8,2023
-
stone hammer crusher mill machine The hammer crusher machine is suitable for crushing medium-hardness materials such as limestone, slag, coke, coal and so on in cement, chemical, electric power, metallurgy and other industrial departments. It has the advantages of simple structure, large crushing ratio and high ...
|
|
-
Ganged 1X2 DWDM EML SFP+ Optical Module 2198230-1
Aug,29,2023
-
2198230-1 Position SFP+ Cage, Ganged (1 x 2) with Heat Sink Connector Press-Fit Through Hole Part Status Active Connector Style Cage, Ganged (1 x 2) with Heat Sink Connector Type SFP+ Number of Positions - Mounting Type Through Hole, Right Angle Termination Press-Fit Features EMI Shielded 1 Designed for network ...
|
|
-
HST-4047SXCR 0.1Vrms Network Magnetic Transformers XFRMR 10/100B-TX
Aug,29,2023
-
HST-4047SXCR Network Magnetic Transformers XFRMR 10/100B-TX ● Designed to meet IEEE 802.3 requirements. ● Primary inductance(Lp)350uH min.@100KHz,0.1Vrms,DC 8mA. ● Capacitance between windings (Cww)75pF Max(at 100kHz, 0.1V). ● Leakage Inductance (LL) 0.5uH Max (at 100kHz, 0.1V). ● Primary DCR:0.9ΩMax;Secondary DCR:1.2...
|
|
-
HST-4091SCR XFRMR 10/100B-TX Network Magnetic Transformers HST-4092SCR
Aug,29,2023
-
HST-4091SCR Network Magnetic Transformers XFRMR 10/100B-TX HST-4092SCR ● Designed to meet IEEE 802.3 requirements. ● Primary inductance(Lp)350uH min.@100KHz,0.1Vrms,DC 8mA. ● Capacitance between windings (Cww)75pF Max(at 100kHz, 0.1V). ● Leakage Inductance (LL) 0.5uH Max (at 100kHz, 0.1V). ● Primary DCR:0.9ΩMax...
|
|